LEGRAND Raritan PX3TS User Manual page 690

Chapter 9: Using the Command Line Interface
config:# sensor inlet <n> <sensor type> lowerCritical <option>
config:# sensor inlet <n> <sensor type> lowerWarning <option>
config:# sensor inlet <n> <sensor type> hysteresis <hy_value>
config:# sensor inlet <n> <sensor type> assertionTimeout <as_value>
670
Set the Lower Warning threshold for an inlet sensor:
Set the deassertion hysteresis for an inlet sensor:
Set the assertion timeout for an inlet sensor:
Variables:
•
<n> is the number of the inlet that you want to configure. For a single-inlet
PDU, <n> is always 1.
•
<sensor type> is one of the following sensor types:
Sensor type
current
voltage
activePower
apparentPower
powerFactor
activeEnergy
unbalancedCurrent
lineFrequency
phaseAngle
Note: If the requested sensor type is not supported, the "Sensor is not
available" message is displayed.
Description
Current sensor
Voltage sensor
Active power sensor
Apparent power sensor
Power factor sensor
Active energy sensor
Unbalanced load sensor
Line frequency sensor
Inlet phase angle sensor