Network Diagnostics - LEGRAND Raritan PX3TS User Manual

Chapter 7: Using the Web Interface
488

Network Diagnostics

PX3TS provides the following tools in the web interface for diagnosing potential
networking issues.
•
Ping: The tool is useful for checking whether a host is accessible through
the network or Internet.
•
Trace Route: The tool lets you find out the route over the network
between two hosts or systems.
•
List TCP Connections: You can use this function to display a list of TCP
connections.
Tip: These network diagnostic tools are also available through CLI. See
Troubleshooting (on page 706).
Choose Maintenance > Network Diagnostics, and then perform any function
below.
Ping:
1. Type values in the following fields.
Field
Network host
Number of requests A number up to 20.
2. Click Run Ping to ping the host. The Ping results are then displayed.
Trace Route:
1. Type values in the following fields.
Field/setting
Hostname
Timeout(s)
Use ICMP packets
2. Click Run. The Trace Route results are then displayed.
List TCP Connections:
1. Click the List TCP Connections title bar to show the list.
Description
The name or IP address of the host that you want to
check.
This determines how many packets are sent for pinging
the host.
Description
The IP address or name of the host whose route you
want to check.
A timeout value in seconds to end the trace route
operation.
To use the Internet Control Message Protocol (ICMP)
packets to perform the trace route command, select
this checkbox.
Network