Chapter 9: Using the Command Line Interface
536
PDU Configuration
This command shows the PDU configuration, such as the device name,
firmware version, model type and upper limit of active powered dry contact
actuators.
#
show pdu
To show detailed information, add the parameter "details" to the end of the
command.
#
show pdu details
Outlet Information
This command syntax shows the outlet information.
#
show outlets <n>
To show detailed information, add the parameter "details" to the end of the
command.
#
show outlets <n> details
Variables:
•
<n> is one of the options: all, or a number.
Option
Description
all
Displays the information for all outlets.
Tip: You can also type the command without adding
this option "all" to get the same data.
A specific outlet
Displays the information for the specified outlet only.
number
Displayed information:
•
Without the parameter "details," only the outlet name is displayed. For an
outlet-switching capable model, both the outlet name and state are
displayed.
•
With the parameter "details," more outlet information is displayed in
addition to the outlet name, such as the outlet rating.