Configuration Files - LEGRAND Raritan PX3TS User Manual

Configuration Files

There are three types of configuration files.
•
fwupdate.cfg:
This file MUST be always present for performing configuration or firmware
upgrade tasks. See fwupdate.cfg
•
config.txt:
This file is used for configuring device settings. See
738).
•
devices.csv:
This file is required only when there are device-specific settings to
configure for multiple PX3TS devices. See
Raritan provides a Mass Deployment Utility, which helps you quickly generate
all configuration files for your PX3TS. See
Deployment Utility (on page 742).
Appendix C: Configuration or Firmware Upgrade with a USB Drive
(on page 734).
devices.csv
Creating Configuration Files via Mass
config.txt (on page
(on page 741).
733