LEGRAND Raritan PX3TS User Manual page 295

Fields Description
Name A name for the sensor or actuator.
Description Any descriptive text you want.
Location (X, Y Describe the sensor's or actuator's location in the data center by typing alphanumeric
and Z) values for the X, Y and Z coordinates. See
278).
If the term "Rack Units" appears in parentheses in the Z location, you must type an
integer number. The Z coordinate's format is determined on the page of
page 258).
Alarmed to
This field is available for the DX-PIR presence detector only.
Normal Delay
It determines the wait time before the PX3TS announces that the presence detector is
back to normal after it already returns to normal.
Adjust the value in seconds.
Binary Sensor
This field is available for any Raritan contact closure sensor except for DX2-DH2C2's
Subtype
contact closure sensors.
Determine the sensor type of your contact closure detector.
▪ Contact Closure detects the door lock or door open/closed status.
▪ Smoke Detection detects the appearance of smoke.
▪ Water Detection detects the appearance of water on the floor.
▪ Vibration detects the vibration of the floor.
To set up a sensor's or actuator's physical location and additional
settings:
1. Click Edit Settings.
2. Make changes to available fields, and then click Save.
Chapter 7: Using the Web Interface
Sensor/Actuator Location Example (on page
Peripherals (on
275