LEGRAND Raritan PX3TS User Manual page 692

Chapter 9: Using the Command Line Interface
config:# sensor outlet <n> <sensor type> upperCritical <option>
config:# sensor outlet <n> <sensor type> upperWarning <option>
config:# sensor outlet <n> <sensor type> lowerCritical <option>
config:# sensor outlet <n> <sensor type> lowerWarning <option>
config:# sensor outlet <n> <sensor type> hysteresis <hy_value>
672
Sensor type Description
residualDCCurrent RCM DC current sensor - detects residual DC
current only.
Available only on PDUs with RCM Type B.
Note: For information on RCM Type A and B sensors, see RCM Current Sensor.
Commands for Outlet Sensors
A sensor configuration command for outlets begins with sensor outlet.
You can configure various outlet sensor threshold settings at a time by
combining multiple commands. See
Set the Upper Critical threshold for an outlet sensor:
Set the Upper Warning threshold for an outlet sensor:
Set the Lower Critical threshold for an outlet sensor:
Set the Lower Warning threshold for an outlet sensor:
Set the deassertion hysteresis for an outlet sensor:
Set the assertion timeout for an outlet sensor:
Multi-Command Syntax (on page 695).