LEGRAND Raritan PX3TS User Manual page 616

Chapter 9: Using the Command Line Interface
596
Setting the HTTP Port
The commands used to configure the HTTP port settings begin with network
services http.
Change the HTTP port:
config:# network services http port <n>
Enable or disable the HTTP port:
config:# network services http enabled <option>
Enforce redirection from HTTP to HTTPS:
config:# network services http enforceHttps <option>
Variables:
•
<n> is a TCP port number between 1 and 65535. The default HTTP port is
80.
•
<option> is one of the options: true or false.
Option Description
▪ The HTTP port is enabled.
true
- OR -
▪ HTTP redirection to HTTPS is enabled.
▪ The HTTP port is disabled.
false
- OR -
▪ HTTP redirection to HTTPS is disabled.