Chapter 9: Using the Command Line Interface
538
Inlet Information
This command syntax shows the inlet information.
#
show inlets <n>
To show detailed information, add the parameter "details" to the end of the
command.
#
show inlets <n> details
Variables:
•
<n> is one of the options: all, or a number.
Option
Description
all
Displays the information for all inlets.
Tip: You can also type the command without adding
this option "all" to get the same data.
A specific inlet
Displays the information for the specified inlet only.
number
An inlet number needs to be specified only when there
are more than 1 inlet on your PDU.
Displayed information:
•
Without the parameter "details," only the inlet's name and RMS current
are displayed.
•
With the parameter "details," more inlet information is displayed in
addition to the inlet name and RMS current, such as the inlet's RMS
voltage, active power and active energy.