Chapter 5: PDU Linking
PDU Linking in the CLI
106
For each PDU in a chain, you can list the PDUs, switch a PDU, add a new link
PDU, and release a link PDU. You can then use all regular PDU-related
commands as usual to access and control individual units, as with any
standalone PDU.
The CLI is disabled on link units. Access to the link unit via the CLI is available
only through the master CLI.
If any link units are configured, the CLI prompt includes the currently selected
PDU and Link ID, such as My Pdu (1) or My Pdu (2).
Some commands are not available for link units:
•
Authentication settings
•
EnergyWise settings
•
Security settings (login, role-based access control, user blocking, and
strong passwords.)
•
Server monitor
•
User management