Time Configuration Commands - LEGRAND Raritan PX3TS User Manual

config:# network ipv4 interface eth1 configMethod static
•
<option> is one of the options: enable or disable.
Option Description
enable Service advertisement via the selected method (MDNS
or LLMNR) is enabled.
disable Service advertisement via the selected method (MDNS
or LLMNR) is disabled.
Examples
This section illustrates several network configuration examples.
Example 1 - Wireless Networking Mode
The following command enables the wireless networking mode.
config:# network wireless enabled true
Example 2 - Enabling IPv6 Protocol on the Ethernet Interface
The following command enables the IPv6 protocol on the ETH1 interface.
config:# network ipv6 interface eth1 enabled true
Example 3 - Wireless Authentication Method
The following command sets the wireless authentication method to PSK.
config:# network wireless authMethod PSK
Example 4 - Static IPv4 Configuration
The following command enables the Static IPv4 configuration mode on the
ETH1 interface.

Time Configuration Commands

A time configuration command begins with time.
Chapter 9: Using the Command Line Interface
603