LEGRAND Raritan PX3TS User Manual page 492

Chapter 7: Using the Web Interface
472
Column Description
User Name The login name of each connected user.
IP Address The IP address of each user's host.
For the login via a local connection (serial RS-232 or USB),
<local> is displayed instead of an IP address.
Client Type The interface through which the user is being connected to
the PX3TS.
▪ Web GUI: Refers to the web interface.
▪ CLI: Refers to the command line interface (CLI).
▪ Webcam Live Preview: Refers to the live webcam
image sessions. See below.
Idle Time The length of time for which a user remains idle.
2. To disconnect any user, click the corresponding
a. Click Disconnect on the confirmation message.
b. The disconnected user is forced to log out.
If there are live webcam sessions:
All Live Preview window sessions sharing the same URL, including one Primary
Standalone Live Preview window and multiple Secondary Standalone Live
Preview windows, are identified as one single "<webcam>" user in the
Connected Users list. You can disconnect a "<webcam>" user to terminate all
sessions sharing the same URL.
The IP address refers to the IP address of the host where the Primary
Standalone Live Preview window exists, NOT the IP address of the other two
associated sessions.
For more webcam information, see
The information in parentheses following "CLI"
indicates how this user is connected to the CLI.
- Serial: The local connection, such as the serial RS-232
or USB connection.
- SSH: The SSH connection.
- Telnet: The Telnet connection.
Webcam Management
.
(on page 493).