LEGRAND Raritan PX3TS User Manual page 656

Chapter 9: Using the Command Line Interface
636
Modifying a User Profile
A user profile contains various parameters that you can modify.
Tip: You can combine all commands to modify the parameters of a specific user
profile at a time. See Multi-Command Syntax
Changing a User's Password
This command allows you to change an existing user's password if you have the
Administrator Privileges.
config:# user modify <name> password
After performing the above command, PX3TS prompts you to enter a new
password. Then:
1. Type a new password and press Enter.
2. Re-type the new password for confirmation and press Enter.
Variables:
•
<name> is the name of the user whose settings you want to change.
Example
The following procedure illustrates how to change the password of the user
"May."
1. Verify that you have entered the configuration mode. See
Configuration Mode
2. Type the following command to change the password for the user profile
"May."
config:# user modify May password
3. Type a new password when prompted, and press Enter.
4. Type the same new password and press Enter.
5. If the password change is completed successfully, the config:# prompt
appears.
(on page 695).
(on page 563).
Entering