Changing Storage Settings - LEGRAND Raritan PX3TS User Manual

Chapter 7: Using the Web Interface
502
3. On the top of the list, click
4. Click Delete on the confirmation message.
To download any image onto the computer:
•
To download an image onto your computer, move your mouse to that
image, right click on it, and choose Save Image As.

Changing Storage Settings

Important: The PX3TS web interface only lists the snapshots stored locally
on the PX3TS device, but does NOT list those saved onto remote servers.
You must launch appropriate third-party applications, such as an FTP client,
to access and manage the snapshots stored on remote servers.
The default is to store snapshots onto the PX3TS device, which has a limitation
of 10 snapshots. Note that any operation involving device reboot will remove
the snapshots saved on the PX3TS, such as firmware upgrade.
If you have either or both needs below, you must save snapshots onto a
remote server like FTP or CIFS/Samba, instead of the PX3TS.
•
Total number of saved snapshots will exceed 10.
•
Saved snapshots must be stored permanently, or at least should not be
removed by the PX3TS device's reboot.
To configure the storage settings:
1. Choose Webcams > Edit Settings.
2. Click the Storage Type field to select the desired storage location and
configure as needed.
Note: When entering user credentials for remote servers, make sure the
user credentials you enter have the write permission, or NO snapshots can
be successfully saved onto remote servers.
.