LEGRAND Raritan PX3TS User Manual page 451

Note: The SNMP notifications may be SNMP v2c or SNMP v3 traps/informs,
depending on the settings for the System SNMP Notification Action. See
Enabling and Configuring SNMP
Then the SNMP notifications are sent when:
▪
Any numeric sensor's reading enters the warning or critical range.
▪
Any sensor reading or state returns to normal.
▪
Any sensor becomes unavailable.
▪
The active energy sensor is reset.
▪
Any state sensor changes its state.
For example, when the outlet 3's voltage exceeds the upper warning
threshold, the SNMP notifications are sent, and when the voltage drops
below the upper warning threshold, the SNMP notifications are sent again.
Chapter 7: Using the Web Interface
(on page 515).
431