Table of Contents
Advertisement
Chapter 7: Using the Web Interface
430
3.
To make PX3TS record the firmware update failure event in the internal log,
select "System Event Log Action" in the 'Available actions' field.
Sample Outlet-Level Event Rule
In this example, we want the PX3TS to send SNMP notifications to the SNMP
manager for any sensor change event of outlet 3.
The event rule involves:
•
Event: Outlet > Outlet 3 > Sensor > Any sub-event
•
Action: System SNMP Notification Action
To create this outlet-level event rule:
1.
For an event at the outlet level, select "Outlet" in the Event field.
2.
Select "Outlet 3" because that is the desired outlet.
3.
Select "Sensor" to refer to sensor-related events.
4.
Select "Any sub-event" to include all events related to all sensors of this
outlet and all thresholds, such as current, voltage, upper critical threshold,
upper warning threshold, lower critical threshold, lower warning threshold,
and so on.
5.
To make PX3TS send SNMP notifications, select "System SNMP Notification
Action" in the 'Available actions' field.
Advertisement
Table of Contents
Troubleshooting
