LEGRAND Raritan PX3TS User Manual page 340

Chapter 7: Using the Web Interface
320
Field/setting
RADIUS
authentication server
name
•
Available settings for the CA Certificate:
If the required certificate file is a chain of certificates, and you are not sure
about the requirements of a certificate chain, see
page 859).
Field/setting Description
Enable verification of Select this checkbox for the PX3TS to verify the validity
TLS certificate chain of the TLS certificate that will be installed.
▪ For example, the PX3TS will check the certificate's
Click this button to import a certificate file. Then you
can:
▪ Click Show to view the certificate's content.
▪ Click Remove to delete the installed certificate if it
▪ Select this checkbox to make the authentication
Allow expired and
not yet valid
certificates
▪ After deselecting this checkbox, the authentication
Allow connection if When this checkbox is deselected, and if the system
system clock is time is incorrect, the installed TLS certificate is
incorrect considered not valid yet and will cause the wireless
network connection to fail.
When this checkbox is selected, it will make the
wireless network connection successful when the
PX3TS system time is earlier than the firmware build
before synchronizing with any NTP server.
▪ The incorrect system time issue may occur when
Description
This field appears when 'EAP' is selected.
Type the name of the RADIUS server if it is present in
the TLS certificate.
▪ The name must match the fully qualified domain
name (FQDN) of the host shown in the certificate.
TLS Certificate Chain
validity period against the system time.
is inappropriate.
succeed regardless of the certificate's validity
period.
fails whenever any certificate in the selected
certificate chain is outdated or not valid yet.
the PX3TS has once been powered off for a long
time.
(on