LEGRAND Raritan PX3TS User Manual page 665

config:# user defaultpreferences preferredTemperatureUnit <option1>
config:# user defaultpreferences preferredLengthUnit <option2>
config:# user defaultpreferences preferredPressureUnit <option3>
Tip: To change the preferred measurement units displayed in the PX3TS user
interfaces for a specific user via CLI, see
641).
Set the default temperature unit:
Set the default length unit:
Set the default pressure unit:
Variables:
•
<option1> is one of the options: C or F.
Option Description
C This option displays the temperature in Celsius.
F This option displays the temperature in Fahrenheit.
•
<option2> is one of the options: meter or feet.
Option Description
meter This option displays the length or height in meters.
feet This option displays the length or height in feet.
•
<option3> is one of the options: pascal or psi.
Option Description
pascal This option displays the pressure value in Pascals (Pa).
psi This option displays the pressure value in psi.
Examples
This section illustrates several user configuration examples.
Chapter 9: Using the Command Line Interface
Changing Measurement Units (on page
645