Setting The Date And Time - LEGRAND Raritan PX3TS User Manual

Customize the date and time
▪ Select 'User specified time'.
▪ Type values in the Date field using the yyyy-mm-dd format, or click
For details, see Calendar
▪ Determine the time format you want by clicking 12H or 24H button.
▪
12H represents the 12-hour format.
▪
24H represents the 24-hour format.
▪ If selecting 12-hour format, then determine the current period by clicking the AM or PM
button.
▪ Type values in the Time field using the hh:mm:ss format, or click
▪
When 12H is being applied, the hour cannot exceed the maximum number 12. If
exceeding 12, the time change cannot be saved.

Setting the Date and Time

Set the internal clock on the PX3TS manually, or link to a Network Time
Protocol (NTP) server.
Note: If you are using Sunbird's Power IQ to manage the PX3TS, you must
configure Power IQ and the PX3TS to have the same date/time or NTP settings.
To set the date and time:
1. Choose Device Settings > Date/Time.
2. Click the 'Time zone' field to select your time zone from the list.
3. If the daylight saving time applies to your time zone, verify the 'Automatic
daylight saving time adjustment' checkbox is selected.
▪
If the daylight saving time rules are not available for the selected time
zone, the checkbox is not configurable.
4. Select the method for setting the date and time.
(on page 373).
Chapter 7: Using the Web Interface
to select a date.
to adjust values.
371