LEGRAND Raritan PX3TS User Manual page 621

Setting the sysName Value
This command sets the SNMP MIB-II sysName value.
config:# network services snmp sysName <value>
Variables:
•
<value> is a string comprising 0 to 255 alphanumeric characters.
Setting the sysLocation Value
This command sets the SNMP MIB-II sysLocation value.
config:# network services snmp sysLocation <value>
Variables:
<value> is a string comprising 0 to 255 alphanumeric characters.
Changing the Modbus Configuration
You can enable or disable the Modbus agent, configure its read-only capability,
or change its TCP port.
A Modbus command begins with network services modbus.
Enabling or Disabling Modbus
This command enables or disables the Modbus protocol.
config:# network services modbus enabled <option>
Variables:
•
<option> is one of the options: true or false.
Option Description
true The Modbus agent is enabled.
false The Modbus agent is disabled.
Chapter 9: Using the Command Line Interface
601