Table of Contents
Advertisement
Chapter 7: Using the Web Interface
222
If wanted, you can resort the list by clicking the desired column header. See
Sorting a List
(on page 179).
To show or hide specific columns on the outlets overview page:
1.
Click
to show a list of outlet data types.
2.
Select those you want to show, and deselect those you want to hide. See
Available Data of the Outlets Overview Page
To configure global outlet settings or perform the load-shedding
command:
1.
Click
to show a list of commands.
2.
Select the desired command.
Note that only outlet-switching capable models have the commands
marked with * in the table.
Command
Threshold Bulk Setup
*Sequence Setup
*Load Shedding Setup
*Activate Load Shedding
-- OR--
Deactivate Load Shedding
To power control or reset the active energy readings of multiple outlets:
You can switch any outlet regardless of its current power state. That is, you can
turn on any outlet that is already turned on, or turn off any outlet that is
already turned off.
1.
Click
to make checkboxes appear in front of outlets.
Tip: To perform the desired action on only one outlet, you can simply click
that outlet without making the checkboxes appear.
2.
Select multiple outlets.
(on page 224).
Refer to
Bulk Configuration for Outlet Thresholds
(on page 225)
Setting Outlet Power-On Sequence and
Delay
(on page 226)
Setting Non-Critical Outlets
227)
Load Shedding Mode
(on page 229)
(on page
Advertisement
Table of Contents
Troubleshooting
