Table of Contents
Advertisement
Chapter 7: Using the Web Interface
378
5.
In this example, Numeric Sensor is selected because we want to select
numeric-sensor-related event(s). Then a field for numeric-sensor-related
events appears. Click this field to select one of the numeric-sensor-related
events from the list.
6.
In this example, 'Above upper critical threshold' is selected because we
want the PX3TS to react only when the selected temperature sensor's
reading enters the upper critical range. A "Trigger condition" field appears,
requiring you to define the "exact" condition related to the "upper critical"
event.
7.
Select the desired radio button to finish the event configuration. Refer to
the following table for different types of radio buttons.
▪
If needed, you may refer to event rule examples in the section titled
Sample Event Rules
8.
To select any action(s), select them one by one from the 'Available actions'
list.
▪
To select all available actions, click Select All.
(on page 429).
Advertisement
Table of Contents
Troubleshooting
