Dhcp Ipv4 Configuration In Linux - LEGRAND Raritan PX3TS User Manual

DHCP IPv4 Configuration in Linux

Important: The magic cookie is transmitted to and stored in PX3TS at the
time of executing the "fwupdate.cfg" commands. The DHCP/TFTP
operation is triggered only when there is a mismatch between the magic
cookie in DHCP and the one stored in PX3TS. Therefore, you must modify
the magic cookie's value in DHCP when intending to execute the
"fwupdate.cfg" commands next time.
Modify the "dhcpd.conf" file for IPv4 settings when your DHCP server is running
Linux.
Required Linux IPv4 settings in DHCP:
1. Locate and open the "dhcpd.conf" file of the DHCP server.
2. The PX3TS will provide the following value of the vendor-class-identifier
option (option 60).
▪
vendor-class-identifier = "Raritan PDU 1.0"
Appendix D: Bulk Configuration or Firmware Upgrade via DHCP/TFTP
765