Chapter 7: Using the Web Interface
ADD a rule to the end of the list
▪ Click Append.
▪ Type an IP address and subnet mask in the IP/Mask field.
▪ Select an option in the Policy field.
▪
Accept: Accepts traffic from/to the specified IP address(es).
▪
Drop: Discards traffic from/to the specified IP address(es), without sending any failure
notification to the source or destination host.
▪
Reject: Discards traffic from/to the specified IP address(es), and an ICMP message is sent
to the source or destination host for failure notification.
INSERT a rule between two rules
▪ Select the rule above which you want to insert a new rule. For example, to insert a rule
between rules #3 and #4, select #4.
▪ Click Insert Above.
▪ Type an IP address and subnet mask in the IP/Mask field.
▪ Select Accept, Drop or Reject in the Policy field. Refer to the above table for details.
350
The system automatically numbers the rule.
6.
When finished, the rules are listed.