LEGRAND Raritan PX3TS User Manual page 438

Chapter 7: Using the Web Interface
418
Execution time Frequency settings
Click the Frequency field to select an option.
Minutes
The frequency ranges from every minute, every 5 minutes, every
10 minutes and so on until every 30 minutes.
Type a value in the Minute field, which is set to either of the
Hourly
following:
▪ The Minute field is set to 0 (zero). Then the action is performed
▪ The Minute field is set to a non-zero value. For example, if it is
Type values or click
Daily
The time is measured in 12-hour format so you must correctly
specify AM or PM by clicking the AM/PM button.
For example, if you specify 01:30PM, the action is performed at
13:30 pm every day.
Both the day and time must be specified for the weekly option.
Weekly
▪ Days range from Sunday to Saturday.
▪ The time is measured in 12-hour format so you must correctly
Both the date and time must be specified for the monthly option.
Monthly
▪ The dates range from 1 to 31.
▪ The time is measured in 12-hour format so you must correctly
Note that NOT every month has the date 31, and February in
particular does not have the date 30 and probably even 29. Check
the calendar when selecting 29, 30 or 31.
This option requires three settings:
Yearly
▪ Month - January through December.
▪ Day of month - 1 to 31.
▪ Time - the value is measured in 12-hour format so you must
An example of the scheduled action is available in the section titled
Sensor Report Example (on page 419).
at 1:00 am, 2:00 am, 3:00 am and so on.
set to 30, then the action is performed at 1:30 am, 2:30 am,
3:30 am and so on.
specify AM or PM by clicking the AM/PM button.
specify AM or PM by clicking the AM/PM button.
correctly specify AM or PM by clicking the AM/PM button.
.
Send