LEGRAND Raritan PX3TS User Manual page 849

Only specific PDUs are implemented with the SecureLock
PDU does not have this design, do NOT use the SecureLock
Tip: The SecureLock outlets can accept regular power cords for power
™
distribution but the SecureLock
To lock a power cord using the SecureLock
1. Verify that the SecureLock
▪
The cords' female socket matches the power socket type (C14 or C20)
on your IT equipment.
▪
The cord's male plug matches the outlet type (C13 or C19) on your
PDU.
2. Connect the SecureLock
▪
Plug the female socket end of the cord into the power socket of the
desired IT equipment.
▪
Plug the male plug end of the cord into the appropriate SecureLock
outlet on the PDU. Push the plug toward the outlet until you hear the
click, which indicates the plug's latches are snapped into the latch slots
of the outlet.
To remove a SecureLock
1. Press and hold down the two latches on the cord's plug as illustrated in the
diagram below.
2. Unplug the cord now.
Appendix J: Additional PX3TS Information
mechanism does not take effect.
™
mechanism:
™
cord you purchased meets your needs.
™
cord between the IT equipment and your PDU.
™
power cord from the PDU:
™
mechanism. If your
™
cords with it.
™
™
829