LEGRAND Raritan PX3TS User Manual page 338

Chapter 7: Using the Web Interface
318
Field/setting Description
Hardware state Check this field to ensure that the PX3TS has detected
a wireless USB LAN adapter. If not, verify whether the
USB LAN adapter is firmly connected or whether it is
supported.
SSID Type the name of the wireless access point (AP).
Force AP BSSID If the BSSID is available, select this checkbox.
BSSID Type the MAC address of an access point.
Enable High Enable or disable 802.11n protocol.
Throughput
(802.11n)
Authentication Select an authentication method.
▪ No Authentication: No authentication data is
▪ PSK: A Pre-Shared Key is required.
▪ EAP: Use Protected Extensible Authentication
Pre-Shared Key
Type the PSK string.
Outer authentication
There are two authentication methods for EAP.
▪ PEAP: A TLS tunnel is established, and an inner
▪ TLS: Authentication between the client and
required.
Protocol. Enter required authentication data in the
fields that appear.
This field appears only when PSK is selected.
This field appears when 'EAP' is selected.
authentication method can be specified for this
tunnel.
authentication server is performed using TLS
certificates.