Overcurrent Protector Information - LEGRAND Raritan PX3TS User Manual

Overcurrent Protector Information

This command is only available for models with overcurrent protectors for
protecting outlets.
This command syntax shows the overcurrent protector information, such as a
circuit breaker or a fuse.
# show ocp <n>
To show detailed information, add the parameter "details" to the end of the
command.
# show ocp <n> details
Variables:
•
<n> is one of the options: all, or a number.
Option Description
all Displays the information for all overcurrent protectors.
Tip: You can also type the command without adding
this option "all" to get the same data.
A specific Displays the information for the specified overcurrent
overcurrent protector only.
protector
number
Displayed information:
•
Without the parameter "details," only the overcurrent protector status and
name are displayed.
•
With the parameter "details," more overcurrent protector information is
displayed in addition to status, such as the rating and RMS current value.
•
For Raritan's outlet-metered models that support "outlet peak current"
sensors, information indicating which outlet MAY cause the OCP-tripped
event is available with this command. See
Cause (on page 256).
Chapter 9: Using the Command Line Interface
Possible OCP-Tripped Root
539