Chapter 9: Using the Command Line Interface
642
Tip: To set the default measurement units applied to the PX3TS user interfaces
for all users via CLI, see
Setting Default Measurement Units
Set the preferred temperature unit:
config:#
user modify <name> preferredTemperatureUnit <option1>
Set the preferred length unit:
config:#
user modify <name> preferredLengthUnit <option2>
Set the preferred pressure unit:
config:#
user modify <name> preferredPressureUnit <option3>
Variables:
•
<name> is the name of the user whose settings you want to change.
•
<option1> is one of the options: C or F.
Option
Description
C
This option displays the temperature in Celsius.
F
This option displays the temperature in Fahrenheit.
•
<option2> is one of the options: meter or feet.
Option
Description
meter
This option displays the length or height in meters.
feet
This option displays the length or height in feet.
•
<option3> is one of the options: pascal or psi.
Option
Description
pascal
This option displays the pressure value in Pascals (Pa).
psi
This option displays the pressure value in psi.
(on page 644).