LEGRAND Raritan PX3TS User Manual page 516

Chapter 7: Using the Web Interface
496
Tip: The date and time shown on the PX3TS web interface are
automatically converted to your computer's time zone. To avoid time
confusion, it is suggested to apply the same time zone settings as those of
PX3TS to your computer or mobile device.
2. To save the current image onto PX3TS or a remote server, click
▪
The default storage location for snapshots is the PX3TS device. To save
them onto a remote server, see
502).
▪
To download an image onto your computer, move your mouse to that
image, right click on it, and choose Save Image As.
3. To have the same live session displayed in a separate window, click
▪
A separate window appears, which is called the Primary Standalone
Live Preview window in this User Guide.
▪
You can send out this window's URL to share the live image with others.
See Sending Links to Snapshots or Videos
Note: Make sure your browser does not block the pop-up window, or the
separate window does not show up.
4. To switch between snapshot and video modes, refer to the Settings section
below.
▪
In the video mode, the number of frames to take per second (fps) and
the video capture date/time are displayed on the top of the image.
Image Controls:
1. Click the Image Controls title bar to expand it.
2. Adjust the brightness, contrast, saturation and gain by modifying their
values or adjusting the corresponding slide bar.
▪
To customize the gain value, you must deselect the Auto Gain
checkbox first.
▪
To restore all settings to this webcam's factory defaults, click
Settings:
1. By default the Settings section is open. If not, click the Settings title bar.
.
Changing Storage Settings
.
(on page 498).
.
(on page