The content to be copied from the CA certificate does NOT include the first line
containing "BEGIN CERTIFICATE" and the final line containing "END
CERTIFICATE." If a certificate is installed, configure the following:
Whether to
Use this command
network ethernet <ETH>
Verify the
enableCertVerification
certificate
<option1>
<option1> = true or false
network ethernet <ETH>
Accept an
allowOffTimeRangeCerts
expired or
<option2>
not valid
certificate
<option2> = true or false
network ethernet <ETH>
Make the
allowConnectionWithIncorrectClo
connection
ck <option3>
successful
by ignoring
the
<option3> = true or false
"incorrect"
system time
Commands for wireless networking:
•
General wireless settings:
To set or
Use this command
enable
network wireless enabled
Wireless
<option>
interface
<option> = true, or false
network wireless SSID <ssid>
SSID
<ssid> = SSID string
network wireless BSSID <bssid>
BSSID
<bssid> = AP MAC address or none
network wireless enableHT
802.11n
<option>
protocol
<option> = true, or false
Appendix J: Additional PX3TS Information
855