LEGRAND Raritan PX3TS User Manual page 333

(Optional) To view the diagnostic log for EAP authentication:
•
Click Show EAP Authentication Log. See
Connections (on page 322).
Common Network Settings
Common Network Settings are OPTIONAL, not required. Therefore, leave them
unchanged if there are no specific local networking requirements.
Field Description
Leave it to the default "None" unless you are
Cascading mode
establishing a cascading chain.
For more information, refer to:
▪
▪
DNS resolver Determine which IP address is used when the DNS
preference resolver returns both IPv4 and IPv6 addresses.
▪ IPv4 address: Use the IPv4 addresses.
▪ IPv6 address: Use the IPv6 addresses.
DNS suffixes Specify a DNS suffix name if needed.
(optional)
Chapter 7: Using the Web Interface
Diagnostic Log for Network
Cascading Multiple PX3TS Devices for Sharing
Ethernet Connectivity (on page 27)
Setting the Cascading Mode (on page 328)
313