LEGRAND Raritan PX3TS User Manual page 625

Setting NTP Parameters
A time configuration command for NTP-related parameters begins with time
ntp.
Specify the primary time server:
config:# time ntp firstServer <first_server>
Specify the secondary time server:
config:# time ntp secondServer <second_server>
To delete the primary time server:
config:# time ntp firstServer ""
To delete the secondary time server:
config:# time ntp secondServer ""
Variables:
•
The <first_server> is the IP address or host name of the primary NTP
server.
•
The <second_server> is the IP address or host name of the secondary NTP
server.
Chapter 9: Using the Command Line Interface
605