LEGRAND Raritan PX3TS User Manual page 347

Chapter 7: Using the Web Interface
In this example, NIC-2 (fd07:2fa:6cff:2405::80) is the next hop router for your
PX3TS to communicate with any device in the other subnet
fd07:2fa:6cff:1111::0.
In the IPv6 "Static Routes" section, you should enter the data as shown below.
Note that the address in the first field must be of the Classless Inter-Domain
Routing (CIDR) notation.
Tip: If you have configured multiple static routes, you can click on any route and
then make changes, use or to re-sort the priority, or click
to delete it.
Interface Names
When your local multiple networks are "directly reachable", you should select
Interface for static routes. Then choose the interface where another network is
connected.
327