Table of Contents
Advertisement
To release a link unit:
From the PDU page, in the Link PDUs section, click a link unit to select it.
Click Release Link PDU.
A confirmation prompts to cancel or release:
If released, the link unit is removed from the PDU page.
Switching to a Different PDU
Switching PDUs is a control function noted by the Switch control in the in the
upper left corner of the PDU, Outlet, Outlet Groups, OCPs, and Feature Ports
pages, called out in the following screen example.
Displayed data in the GUI defaults to the master unit. The Switch control allows
you to switch quickly from a master page to a link unit page, and back again to
the master.
To switch to a different PDU:
1.
Click the Switch
control.
2.
Select one of the link PDUs from the drop-down list. Link number "2-8"
appears in parentheses.
3.
The page displays data for the selected link PDU.
Chapter 5: PDU Linking
85
Advertisement
Table of Contents
Troubleshooting
