LEGRAND Raritan PX3TS User Manual page 290

Chapter 7: Using the Web Interface
Example
Port 1
Port 1,
Channel 2
Port 1,
Chain Position 4
Port 1,
Chain Position 3,
Channel 2
Port 1,
Chain Position 1,
Hub Port 2,
Chain Position 3
270
•
If a Raritan DPX3-ENVHUB4 sensor hub is involved, the hub port
information is also indicated for DX2, DX, DPX2 and DPX3 series, but NOT
indicated for DPX series.
For example, Hub Port 3.
•
If a sensor/actuator contains channels, such as a contact closure sensor or
dry contact actuator, the channel information is included in the position
information.
For example, Channel 1.
Sensor/actuator position examples:
Physical position
Connected to the sensor port #1.
▪ Connected to the sensor port #1.
▪ The sensor/actuator is the 2nd channel of the sensor package.
▪ Connected to the sensor port #1.
▪ The sensor/actuator is located in the 4th sensor package of the sensor chain.
▪ Connected to the sensor port #1.
▪ The sensor/actuator is located in the 3rd sensor package of the sensor chain.
▪ It is the 2nd channel of the sensor package.
▪ Connected to the sensor port #1.
▪ Connected to the 2nd port of the DPX3-ENVHUB4 sensor hub, which shows the
following two pieces of information:
▪
The hub's position in the sensor chain -- "Chain Position 1"
▪
The hub port where this particular sensor package is connected -- "Hub Port 2"
▪ The sensor/actuator is located in the 3rd sensor package of the sensor chain
connected to the hub's port 2.