LEGRAND Raritan PX3TS User Manual page 650

Chapter 9: Using the Command Line Interface
630
Changing an Outlet's Default State
This section applies to outlet-switching capable models only.
This command determines the initial power condition of an outlet after the
PX3TS powers up.
config:# outlet <n> stateOnDeviceStartup <option>
Variables:
•
<n> is the number of the outlet that you want to configure.
•
<option> is one of the options: off, on, lastKnownState and pduDefined.
Option Description
off Turn off the outlet.
on Turn on the outlet.
lastKnownState Restore the outlet to the state prior to last PDU power
down.
pduDefined PDU-defined setting.
Note: Setting the outlet's default state to an option other than pduDefined
overrides the PDU-defined default state on that outlet. See
PDU-Defined Default Outlet State
Setting the
(on page 571).