LEGRAND Raritan PX3TS User Manual page 170

Chapter 6: Using the PX3TS
150
Power Control
This section applies to outlet-switching capable models only. That is,
PX3TS-5000 series.
The front panel outlet control must be enabled for performing this power
control function. The default is to disable this function. See
Settings (on page 454).
Available options for power control vary, based on the power state of the
selected outlet.
•
For an outlet which has been turned on, the 'Switch On' option is
unavailable.
•
For an outlet which has been turned off, the 'Switch Off' option is
unavailable.
Control buttons that can be used and the system time are shown at the bottom
of the LCD display.
To power on, off or cycle an outlet using the LCD display:
1. Press or
2. The LCD display shows a list of outlets with their receptacle types, current
values (A), and power states which are indicated by the colors of circles.
The currently-selected outlet number and total of outlets are indicated in
the top-right corner of the display.
▪
A red circle indicates that this outlet is powered on.
▪
A green circle indicates that this outlet is powered off.
If so, the word "Off" replaces the current value.
3. Press or
If the desired outlet is not visible, press
down.
4. The LCD display shows the selected outlet's information. For details, see
Showing an Outlet's Information
5. Press to go to the power control page. A submenu appears.
Note: The submenu is not available when the front panel outlet control is
disabled. If so, a message "Front-panel outlet control is disabled" is
displayed.
▪
When the selected outlet has been turned off, 'Switch On' replaces the
option of 'Switch Off'.
6. Press or
▪
Switch Off: Turn off the outlet.
▪
Switch On: Turn on the outlet.
to select "Outlets" in the Main Menu, and press
to select an outlet, and press
(on page 149).
to select the desired option, and press
Front Panel
.
or to scroll up or
.
.