LEGRAND Raritan PX3TS User Manual page 685

Setting the Z Coordinate
This command specifies the Z coordinate of an environmental sensor.
config:# externalsensor <n> zlabel "<coordinate>"
Variables:
•
<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the PX3TS web interface or using
the command "show externalsensors <n>" in the CLI. It is an integer
starting at 1.
•
Depending on the Z coordinate format you set, there are two types of
values for the <coordinate> variable:
Type Description
Free form <coordinate> is a string comprising up to 24 ASCII
printable characters, and it must be enclosed in
quotes.
Rack units <coordinate> is an integer number in rack units.
Note: To specify the Z coordinate using the rack units, see
Coordinate Format for Environmental Sensors
Changing the Sensor Description
This command provides a description for a specific environmental sensor.
config:# externalsensor <n> description "<description>"
Variables:
•
<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the PX3TS web interface or using
the command "show externalsensors <n>" in the CLI. It is an integer
starting at 1.
•
<description> is a string comprising up to 64 ASCII printable characters,
and it must be enclosed in quotes when it contains spaces.
Chapter 9: Using the Command Line Interface
Setting the Z
(on page 575).
665