LEGRAND Raritan PX3TS User Manual page 164

Chapter 6: Using the PX3TS
Menu command
Alerts
PDU
Transfer Switch
OCPs
Outlets
Peripherals
Assets
Device Info
144
Function
Indicates all alerted sensors, if any. See
Shows the internal beeper's state, and, if it is on, the reason for turning on.
Total active power and total active energy are also shown.
See PDU (on page 145).
Three types of information are shown.
▪ Transfer switch status
▪ Inlets data
▪ Transfer log
Shows a list of overcurrent protector information. See
Only the models with overcurrent protectors have this menu item.
This menu command is only available on outlet-switching capable models,
such as PX3TS-5000 series.
Shows each outlet's information.
If your PDU supports outlet-switching, you can turn on, off or power cycle an
outlet.
See Outlets (on page 148).
Shows the information of connected Raritan environmental sensors or
actuators, such as the temperature sensor.
You can turn on or off a connected actuator with this command.
See Peripherals (on page 151).
Shows the asset management information if Raritan asset management
equipment is connected to your PX3TS. See
Shows the device information, such as IP and MAC address. See
page 155).
Note: To return to the automatic mode, press
Modes (on page 140).
Alerts (on page 145).
OCPs (on page 148).
Assets (on page 154).
Device Info
. See Automatic and Manual
(on