LEGRAND Raritan PX3TS User Manual page 888

Appendix K: Integration
Diagram key
PX rack PDU
D2CIM-PWR
KX III
868
Connecting a PX PDU
Raritan PX series rack PDUs (power strips) are connected to the Dominion
device using the D2CIM-PWR CIM.
To connect the rack PDU:
1. Connect the male RJ-45 of the D2CIM-PWR to the following female RJ-45
connector of the rack PDU.
▪
PX1 series: RJ-45 "SERIAL" port
▪
PX2, PX3 or PX3TS series: RJ-45 "FEATURE" port
2. Connect the female RJ-45 connector of the D2CIM-PWR to any of the
available female system port connectors on the KX III using a straight
through Cat5 cable.
3. Attach an AC power cord to the target server and an available rack PDU
outlet.
4. Connect the rack PDU to an AC power source.
5. Power on the device.