Devices.csv - LEGRAND Raritan PX3TS User Manual

devices.csv

If there are device-specific settings to configure, you must create a device list
configuration file - devices.csv, to store unique data of each PX3TS device.
This file must be:
•
A CSV (comma-separated values) format file exported from a spreadsheet
application like Excel.
•
Copied to the root directory of USB drive.
•
Referenced in the device_list option of the "fwupdate.cfg" file. See
fwupdate.cfg (on page 734).
Every PX3TS identifies its entry in the "devices.csv" file by comparing its serial
number or MAC address to one of the columns in the file.
Determine the column to identify PX3TS devices:
•
By default, the PX3TS searches for its serial number in the 1st column of
"devices.csv".
•
To override the default, set the match option in the "fwupdate.cfg" file to a
different column.
Syntax:
•
Values containing commas, line breaks or double quotes are all supported.
•
The commas and line breaks to be included in the values must be enclosed
in double quotes.
•
Every double quote to be included in the value must be escaped with
another double quote.
For example:
Value-1,"Value-2,with,three,commas",Value-3
Value-1,"Value-2,""with""three""double-quotes",Valu
e-3
Value-1,"Value-2
with a line break", Value-3
Appendix C: Configuration or Firmware Upgrade with a USB Drive
741