LEGRAND Raritan PX3TS User Manual page 488

Chapter 7: Using the Web Interface
468
Identifying Cascaded Devices
For information on how to cascade PX3TS devices, see
PX3TS Devices for Sharing Ethernet Connectivity
This section explains how to identify a cascaded device on the Device
Information page.
Note: For more information on cascading configurations and restrictions, refer
to the Cascading Guide on the Raritan
(http://www.raritan.com/support/).
To identify the cascading status:
1. Choose Maintenance > Device Information.
2. Click the Network title bar.
▪
If the information shown on this page does not match the latest status,
press F5 to reload it.
Cascading information in the Bridging mode:
•
The Common section contains two read-only fields for indicating the
cascading status. Note that the cascading position is NOT available in the
Bridging mode.
Fields Description
Port forwarding
Indicates the Port Forwarding is disabled. See
the Cascading Mode
BRIDGE section
Indicates the device is in the Bridging mode and its IP
address.
Cascading Multiple
(on page 27).
Support page
(on page 328).
Setting