Reliability Data
This command shows the reliability data.
#
show reliability data
Reliability Error Log
This command shows the reliability error log.
#
show reliability errorlog <n>
Variables:
•
<n> is one of the options: 0 (zero) or any other integer number.
Option
Description
0
Displays all entries in the reliability error log.
Tip: You can also type the command without adding
this option "0" to get all data.
A specific integer
Displays the specified number of last entries in the
number
reliability error log.
Reliability Hardware Failures
This command shows a list of detected hardware failures.
#
show reliability hwfailures
For details, see
Hardware Issue Detection
Examples
This section provides examples of the show command.
Chapter 9: Using the Command Line Interface
(on page 489).
559