Table of Contents
Advertisement
Appendix I: RADIUS Configuration Illustration
814
3.
Under "RADIUS Clients and Servers," right-click RADIUS Client and select
New RADIUS Client. The New RADIUS Client dialog appears.
4.
Do the following to add your PX3TS to NPS:
a.
Verify the "Enable this RADIUS client" checkbox is selected.
b. Type a name for identifying your PX3TS in the "Friendly name" field.
c.
Type 192.168.56.29 in the "Address (IP or DNS)" field.
d. Select RADIUS Standard in the "Vendor name" field.
e.
Select the Manual radio button.
Advertisement
Table of Contents
Troubleshooting
