Table of Contents
Advertisement
Chapter 8: Using SNMP
516
2.
In the SNMP Notifications section, enable the SNMP notification feature,
and configure related fields. For details, refer to:
▪
SNMPv2c Notifications
▪
SNMPv3 Notifications
Note: Any changes made to the 'SNMP Notifications' section on the SNMP page
will update the settings of the System SNMP Notification Action, and vice versa.
See
Available Actions
(on page 394).
SNMPv2c Notifications
1.
Choose Device Settings > Network Services > SNMP.
2.
In the SNMP Agent, make sure the Enable SNMP v1/v2c checkbox is
selected.
3.
In the SNMP Notifications section, make sure the 'Enable SNMP
notifications' checkbox is selected.
4.
Select 'SNMPv2c trap' or 'SNMPv2c inform' as the notification type.
5.
Type values in the following fields.
Field
Timeout
(on page 516)
(on page 517)
Description
The interval of time, in seconds, after which a new
inform communication is resent if the first is not
received.
▪ For example, resend a new inform communication
Advertisement
Table of Contents
Troubleshooting
