Updating The Px3Ts Firmware - LEGRAND Raritan PX3TS User Manual

Chapter 7: Using the Web Interface
474

Updating the PX3TS Firmware

Firmware files are available on Raritan website's
(http://www.raritan.com/support/).
When performing the firmware upgrade, the PX3TS keeps each outlet's power
status unchanged so no server operation is interrupted. During and after the
firmware upgrade, outlets that have been powered on prior to the firmware
upgrade remain powered ON and outlets that have been powered off remain
powered OFF.
You must be the administrator or a user with the Firmware Update permission
to update the PX3TS firmware.
Before starting the upgrade, read the release notes downloaded from Raritan
website's Support page (http://www.raritan.com/support/). If you have any
questions or concerns about the upgrade, contact Raritan Technical Support
BEFORE upgrading.
On a multi-inlet PDU, all inlets must be connected to power for the PDU to
successfully upgrade its firmware.
Note that firmware upgrade via iOS mobile devices, such as iPad, requires the
use of iCloud Drive or a file manager app.
Warning: Do NOT perform the firmware upgrade over a wireless network
connection.
Firmware upgrade restrictions:
•
Intermediate firmware required for upgrades from "pre-3.3.0" to 3.5.0 or
later:
If your PX3TS is running any firmware version older than 3.3.0, such as
3.2.30, an intermediate firmware is required for the upgrade to 3.5.0 or
later. Follow the sequence below:
a. Upgrade to an intermediate firmware first, which is either 3.3.x or
3.4.x.
b. Then upgrade from the intermediate firmware to 3.5.0 or later.
•
Upgrade from "pre-3.3.10" versions on a cascading CHAIN:
If you are upgrading an existing cascading chain from a "pre-3.3.10"
firmware version, you must follow the
Cascading Chains (on page 476).
To update the firmware:
1. Choose Maintenance > Update Firmware.
2. Click
3. Click Upload. A progress bar appears to indicate the upload process.
Support page
Upgrade Guidelines for Existing
to select an appropriate firmware file.