Enabling Or Disabling Load Shedding - LEGRAND Raritan PX3TS User Manual

Enabling or Disabling Load Shedding

This section applies to outlet-switching capable models only.
This command determines whether to enter or exit from the load shedding
mode.
# loadshedding <option>
After performing the above command, PX3TS prompts you to confirm the
operation. Press y to confirm or n to abort the operation.
To skip the confirmation step, you can add the "/y" parameter to the end of the
command so that the operation is executed immediately.
# loadshedding <option> /y
Variables:
•
<option> is one of the options: enable or disable.
Option Description
start Enter the load shedding mode.
stop Quit the load shedding mode.
Example
The following command has the PX3TS enter the load shedding mode.
config:# loadshedding start
Chapter 9: Using the Command Line Interface
697