LEGRAND Raritan PX3TS User Manual page 539

Field
Port
User ID
Timeout
Number of retries
Security level
Authentication
protocol,
Authentication
passphrase,
Confirm
authentication
passphrase
Privacy protocol,
Privacy passphrase,
Confirm privacy
passphrase
7. Click Save.
Description
This is the address to which notifications are sent by
the SNMP agent.
The port number used to access the device(s).
User name for accessing the device.
▪ Make sure the user has the SNMP v3 access
permission.
The interval of time, in seconds, after which a new
inform communication is resent if the first is not
received.
▪ For example, resend a new inform communication
once every 3 seconds.
Specify the number of times you want to resend the
inform communication if it fails.
▪ For example, inform communications are resent up
to 5 times when the initial communication fails.
Three types are available.
▪ noAuthNoPriv - neither authentication nor privacy
protocols are needed.
▪ authNoPriv - only authentication is required.
▪ authPriv - both authentication and privacy protocols
are required.
The three fields are available when the security level is
set to AuthNoPriv or authPriv.
▪ Select the authentication protocol - MD5 or SHA
▪ Enter the authentication passphrase
The three fields are available when the security level is
set to authPriv.
▪ Select the Privacy Protocol - DES or AES
▪ Enter the privacy passphrase and then confirm the
privacy passphrase
Chapter 8: Using SNMP
519