LEGRAND Raritan PX3TS User Manual page 542

Chapter 8: Using SNMP
Layout
Opening the MIB reveals the custom objects that describe the PX3TS system at
the unit level as well as at the individual-outlet level.
As standard, these objects are first presented at the beginning of the file, listed
under their parent group. The objects then appear again individually, defined
and described in detail.
For example, the measurementsGroup group contains objects for sensor
readings of PX3TS as a whole. One object listed under this group,
measurementsUnitSensorValue, is described later in the MIB as "The sensor
value". pduRatedCurrent, part of the configGroup group, describes the PDU
current rating.
SNMP Sets and Thresholds
Some objects can be configured from the SNMP manager using SNMP set
commands. Objects that can be configured have a MAX-ACCESS level of
"read-write" in the MIB.
These objects include threshold objects, which cause the PX3TS to generate a
warning and send an SNMP notification when certain parameters are exceeded.
See Sensor Threshold Settings (on page 834) for a description of how
thresholds work.
Note: When configuring the thresholds via SNMP set commands, ensure the
value of upper critical threshold is higher than that of upper warning threshold.
522