Chapter 8: Using SNMP
Downloading SNMP MIB
520
You must download an appropriate SNMP MIB file for successful SNMP
communications. Always use the latest SNMP MIB downloaded from the
current firmware of your PX3TS.
You can download the MIBs from two different pages of the web interface.
MIB download via the SNMP page:
1.
Choose Device Settings > Network Services > SNMP.
2.
Click the Download MIBs title bar.
3.
Select the desired MIB file to download.
▪
PDU2-MIB: The SNMP MIB file for PX3TS management.
▪
ASSETMANAGEMENT-MIB: The SNMP MIB file for asset management.
▪
LHX-MIB: The SNMP MIB file for managing the LHX/SHX heat
exchanger(s).
4.
Click Save to save the file onto your computer.
MIB download via the Device Information page:
1.
Choose Maintenance > Device Information.
2.
In the Information section, click the desired download link:
▪
PDU2-MIB
▪
ASSETMANAGEMENT-MIB
▪
LHX MIB
3.
Click Save to save the file onto your computer.
Note: LHX-MIB is available only after the LHX/SHX support has been enabled.
See
Miscellaneous
(on page 462).